EN
Stone and iron removal feeder
In feed production, impurities such as stones and iron filings may be mixed in the raw materials. If these impurities enter subsequent processing equipment such as crushers, it will not only reduce the quality of the feed, but also may cause severe wear and even lead to safety accidents. The stone and iron removal feeder can effectively solve these problems.
MOQ: 1
- Overview
- Recommended Products
Product Overview
In feed production, impurities such as stones and iron filings may be mixed in the raw materials. If these impurities enter subsequent processing equipment such as crushers, it will not only reduce the quality of the feed, but also may cause severe wear and even lead to safety accidents. The stone and iron removal feeder can effectively solve these problems.
Specifications and Parameters
| MODEL | POWER(KW) | CONVEYING CAPACITY(T/H) |
| JFYW25X40 | 1.5 | 20 |
| JFYW25X80 | 2.2 | 25 |
| JFYW25X100 | 2.2 | 30 |
| JFYW25X120 | 2.2 | 40 |
| JFYW25X140 | 3 | 50 |
Product Details Description
1）The impeller enters the material trough from the feed port and, through the rotation of the rotor, carries the material to the discharge port. Near the discharge port, there is an iron removal plate installed, which can remove iron from the material.
2) It adopts variable-speed transmission, which can provide a constant optimal load for the crusher motor, improve efficiency, and is conveniently applicable to automatic crushing control and automatic load control of the crusher.
